SP104E Mini RF Pixel Controller
Professional LED Pixel Lights and Controllers Supplier
● Support almost every kind of one-wire LED-DRIVER-IC;
● Each controller can control up to 2048 pixels;
● Working voltage: 5V—24V-supply-voltage
● Cautions: Please make sure the power supply voltage is match to your controller before you power it.
17 Keys SP104E Mini-RF controller
Functions Of Each Button:
Continuously press the AUTO button 5 times until LED is off, and release the AUTO button to into the mode of switching in red, green, blue, yellow, purple, cyan, and white, which can test your LED.
|Matching||Continuously pressing the MATCH button 5 times until LEDs flash in white quickly to match the Remote control with the receiving controller. Pressing the MATCH button 5 times till LEDs flash in white slowly to un-match;|
|Reorder RGB||Differ from kinds of LED, The R G B keys may don’t perfectly match your LED, Reorder them if needed. Continuously press the SETTING button 5 times until LED lights flash in white once and then turn all white, pressing the R button until LED is red, press the G button until LED is green, press the B button till LED is blue, then press the SETTING button once to confirm your setting.|
|Adjust Num of Pixels||The factory default setting of the number of controlled pixels is 600. Continuously press the SETTING button 5 times until LED lights flash once and turn all white, pressing MODE+ to add pixels, pressing MODE- to decrease pixels, (each pressing add or decrease 60 pixels) then press the SETTING button to confirm your setting; Can be regulated to up to 2048 pixels, the minimum number is 300 pixels.|