Close this search box.

SK6813 LED Strip

Types of SK6813 LED Strip

DC5V 60LEDs SK6813 RGB Strip>>

SK6813 RGB LED Strip Features

Brightness and Color Consistency: Each LED on the strip has a built-in IC that helps maintain consistent brightness and color across the entire strip, even when the power supply voltage fluctuates.

Addressable and Programmable: Each LED on the SK6813 strip is individually addressable, which means you can control the color and brightness of each LED separately.

Flexible Design and Installation: This addressable LED strip is flexible and can be easily bent or curved to fit various surfaces and shapes. 

Energy Efficiency: These LED strips are energy efficient, consuming less power than traditional lighting solutions while providing bright, vivid illumination.

SK6813 LED Strip Accessories

Cable Connectors

FAQs About SK6813 LED Strip

1. What is the difference between SK6813 and other addressable LED strips, such as WS2812B?

SK6813 and WS2812B LED strips are both addressable and programmable, but the SK6813 has an additional advantage of better color and brightness consistency due to the built-in IC within each LED.

2. Can I use an SK6813 RGB LED strip with Arduino or Raspberry Pi?

Yes, SK6813 RGB LED strips are compatible with various microcontrollers, including Arduino and Raspberry Pi. You will need the appropriate libraries and code to control the strip.

3. Are SK6813 LED strips waterproof?

SK6813 LED strips can be waterproof or non-waterproof, depending on their IP rating. Waterproof strips are suitable for outdoor installations or areas with moisture, while non-waterproof strips are intended for indoor use only.

4. Can I cut and reconnect SK6813 LED tape light?

Yes, you can cut the SK6813 LED tape light at designated cut points, typically marked by a copper pad or a scissor icon. To reconnect the strips, you can use soldering or LED strip connectors.

5. How do I power an SK6813 LED strip?

SK6813 LED strips can be powered using a compatible power supply with the appropriate voltage (5V or 12V). The power supply should have sufficient capacity to handle the total power consumption of the strip.

SK6813 LED Strip: The Ultimate Guide to Understanding and Using

Table of Contents

As LED lighting technology continues to evolve, the SK6813 LED strip has quickly become a popular choice for lighting designers, DIY enthusiasts, and commercial users alike. This versatile strip is known for its addressable design, bright and vibrant colors, and ease of use. In this article, we’ll take a deep dive into the SK6813 LED strip, exploring its features, benefits, and how to use it effectively

Introduction to the SK6813 Digital LED Strip

The SK6813 digital LED strip is a high-quality lighting solution that delivers stunning color effects and animations. This LED strip is known for its addressable design, which allows each individual LED to be controlled independently, providing a wide range of lighting options.

It is designed to be versatile, reliable, and easy to use, making it an ideal choice for a wide range of applications. Whether you’re looking to add some colorful lighting to your home, create a dynamic lighting display for a stage production, or add some eye-catching lighting to your car, the SK6813 digital LED strip is a great choice.

What Are Addressable LED Strips?

Before diving deeper into the SK6813 RGB LED strip, it’s important to understand what an addressable LED strip is. Addressable LED strips are a type of LED strip that allows each individual LED to be controlled independently. This means that each LED can be programmed to display a specific color or animation, allowing for a wide range of lighting effects.

Addressable LED strips are typically controlled using a microcontroller, which sends signals to the LED strip to control the individual LEDs. This allows for a high degree of customization and flexibility, making addressable LED strips a popular choice for lighting designers and DIY enthusiasts.

Benefits of Using SK6813 LED StripTape

There are many benefits to using the SK6813 LED tape, including:

• Addressable design for a wide range of lighting effects
• Brightness and vibrancy of colors
• Durability for long-lasting use
• Easy installation and compatibility with a range of controllers
• Versatility for a wide range of applications

Applications of SK6813 LED Light Strips

The versatility of SK6813 LED light strips allows for use in a wide range of applications:

Indoor and Outdoor Lighting

SK6813 pixel LED strips are suitable for both indoor and outdoor lighting installations, depending on their waterproof rating. They can be used to accentuate architectural features, create ambient lighting, or provide task lighting.

Advertisement and Signage

The programmable nature of these strips makes them perfect for creating eye-catching advertisements and signage displays where dynamic, color-changing effects are desired.

Entertainment and Events

SK6813 LED strips are excellent for stage lighting, DJ booths, and other entertainment venues, adding dynamic, vibrant colors and effects to elevate the atmosphere.

Architectural Lighting

These LED strips can be used to enhance the appearance of buildings, bridges, and other structures, adding a dramatic, colorful touch.

How to Choose the Right SK6813 Addressabel Strip

When selecting an SK6813 addressable strip, consider the following factors:

LED Density

LED density refers to the number of LEDs per meter. Higher density strips provide more consistent and brighter illumination, while lower density strips are more affordable and consume less power.

Waterproof Rating

Choose a waterproof rated strip (IP65 or IP67) for outdoor installations or areas prone to moisture or water exposure. Non-waterproof strips (IP20) are suitable for indoor applications only.

Voltage and Power Requirements

SK6813 LED strips are available in 5V and 12V options. Consider your power supply and voltage requirements when selecting a strip.

Compatibility with Controllers and Accessories

Ensure that your addressable LED strip is compatible with your preferred microcontroller, power supply, and other accessories.

Installation Tips for SK6813 LED Strips

Installing the SK6813 LED tape is a simple process that can be done by anyone with basic DIY skills. Here’s a step-by-step guide to installing the flexible LED strip:

1. Measure and plan your installation before cutting the strip.

2. Use appropriate connectors and cables for a secure connection.

3. Follow the manufacturer’s guidelines for cutting, soldering, and connecting the strip.

4. Use mounting clips, adhesive tape, or silicone sealant to secure the strip in place.

Maintenance and Safety Precautions

Proper maintenance and safety precautions are important for ensuring that your SK6813 LED strip continues to work safely and effectively. Here are some tips for maintaining and using your the SK6813 LED tapes safely:

1. Regularly inspect your LED strip for any signs of damage or wear.

2. Keep the strip clean and free from dust and debris.

3. Follow the manufacturer’s guidelines for maximum strip length and power supply requirements.

4. Do not bend or fold the strip sharply, as this may damage the circuitry and LEDs.


SK6813 strip lights are a versatile and powerful lighting solution that can be used in various applications, ranging from indoor and outdoor lighting to advertising and entertainment. Their addressable and programmable nature, combined with their flexibility and ease of installation, make them an ideal choice for both DIY enthusiasts and professionals alike. By considering factors such as LED density, waterproof rating, voltage, and compatibility with controllers and accessories, you can choose the perfect SK6813 RGB strips for your project.

Why Choose SunTechLite

Located in Shenzhen, SunTechLite is one of the leading LED strip manufacturers in China. After 15 years of development, we have developed into a company integrating production and trade, and have won the trust and support of customers from all over the world with high-quality products and high-quality services.

SunTechLite uses high-quality materials and components to produce LED strips, ensuring our products are durable and reliable, and can be subject to harsh environments. And we test all products before shipping goods out to ensure that all LED strips are safe and reliable and meet standards and specifications.

We have a specialized engineering team to offer technical support and assistance with the installation and programming of the LED strips. And you can feel free to contact us if any questions in the using process.

All the LED strip lights provided at least 3 years warranty, and 5 years warranty is available.