Close this search box.
LED Pixel Tube 360° 3D


360-degree & High-brightness & Easy install & Waterproof

Product Description


(1) LED rainbow tube light is a double-layer milky white PC tube designed with 360-degree light, which makes the light more delicate and not dazzling, and the light is even.

(2) LED rainbow tube light adopts high-brightness and super high-quality LED. LED rainbow tube light is a kind of indoor and outdoor landscape decorative light, which is mainly suitable for hanging on branches, under eaves and any objects that can be hung in indoor buildings.

(3) LED rainbow tube light is easy to install, and the LED rainbow tube has high brightness, dazzling color and low power consumption. It can be connected arbitrarily according to the environment, and the flickering effect can be freely set according to your requirements. The main colors are RGB and RGBW.

(4) LED rainbow tube light can be made into two external control modes: DMX512 and TTL.

(5) LED rainbow tube light shell is mainly made of imported PC material. The main advantages of PC materials: high-quality heat resistance, good transparency and high impact resistance and other physical and mechanical properties, and has the advantages of high light transmittance, corrosion resistance, UV resistance, etc.

Product Dimensions

DMX LED tube Product Dimensions

Installation Notes

(1) Please read the manual in detail before installation.
(2) Before installation, make sure that the working voltage of the LED rainbow tube light matches the output voltage of the switching power supply you purchased.
(3) When installing, pay attention to the wiring label of the lamp. The red wire is connected to “positive (+)”, the black wire is connected to “negative (-)”, and other colors are detailed on the wiring label of the lamp. The wiring must be powered off during installation.
(4) It is strictly forbidden to cut off the male and female head wires with electricity, so as not to burn out the lamps in the short-circuit.
(5) LED rainbow tube light with control must comply with the male in and female out, and the direction of the signal must be connected in series when connecting the lamps.
(6) This lamp is forbidden to be disassembled without permission, if it is disassembled without permission, our company will not bear the warranty.

Simple troubleshooting

(1) When the lamp does not turn on when it is powered on: check whether the switching power supply has a working output voltage, or whether the working voltage of the switching power supply is normal.
(2) After the switch power supply works normally, the lamp still does not light up: check whether the signal line of the lamp is connected incorrectly or whether the connection is normal, and check whether the controller works normally and whether it has been powered on.

(3) The above work is normal, but the lamp still does not light up: check whether the SD card of the controller has been inserted, and whether there is a program in the SD card.
(4) The lamp jumps or flickers: Check whether the negative pole of the lamp is connected in parallel with the negative pole of the switching power supply including the GND of the controller.
(5) If the above inspection is completed, it is still out of control, please contact our sales staff to deal with it.

Product Parameters

Product Specification (Customization Available)

(1) Control Method: TTL

ModelSize (mm)Diameter (mm)LED Qty. (piece)Control MethodIP RatingPixel Qty. (piece)LED ColorPower (Watt)Voltage (V)

(2) Control Method: DMX

ModelSize (mm)Diameter (mm)LED Qty. (piece)Control MethodIP RatingPixel Qty. (piece)LED ColorPower (Watt)Voltage (V)

360 View DMX RGB LED Tube

DMX RGB LED Tube Lighting Effect

Table of Contents

DMX RGB LED Tube Lighting Solution


When it comes to creating a mesmerizing visual experience, 360 degrees DMX RGB LED tube lighting design stands out as a versatile and innovative solution. This type of lighting allows for seamless integration of colors and patterns, transforming spaces into immersive environments. In this article, we will delve into the world of DMX RGB LED tube lighting, discuss its design elements, factors to consider in the design process, and various applications.

Understanding DMX RGB LED Tube Lighting

What is DMX?

DMX, or Digital Multiplex, is a communication protocol used to control lighting and effects equipment. It allows for the creation of complex lighting scenes by sending digital signals from a DMX controller to the fixtures in a daisy-chain configuration. This level of control enables designers to create intricate and dynamic lighting displays.

What is RGB LED?

RGB LED stands for Red, Green, and Blue Light Emitting Diodes. These LEDs can produce a wide range of colors by mixing varying intensities of red, green, and blue light. The combination of these primary colors allows for the creation of virtually any color in the visible spectrum.

The Importance of DMX RGB LED Tube Lighting

Combining DMX control with RGB LED technology in tube lighting enables designers to create a 360-degree lighting experience that can be controlled with precision. This fusion allows for the creation of captivating visual displays, with smooth transitions and color mixing, enhancing the overall ambiance of a space.

Design Elements in DMX RGB LED Tube Lighting

Tube Layout

The tube layout is an essential aspect of creating a visually appealing 360-degree lighting experience. Designers must consider the arrangement of tubes, their spacing, and orientation to achieve the desired effects and ensure even light distribution.

Selection of LED Chips

The choice of LED chips impacts the quality and performance of the lighting system. High-quality LED chips ensure uniform color mixing, longevity, and energy efficiency. It’s crucial to select chips that offer a wide color gamut and high color rendering index (CRI) for the best visual experience.

LED Driver

An LED driver is responsible for providing constant current to the LED chips, ensuring consistent brightness and color output. A well-designed driver will also offer protection against over-voltage, over-current, and over-temperature conditions, ensuring the longevity of the lighting system.

DMX Controller

The DMX controller is the brains behind the operation, allowing designers to create intricate lighting scenes and effects. A user-friendly interface and compatibility with various software platforms are essential features to consider when selecting a DMX controller.

Factors to Consider in the Design Process

Spatial Considerations

Designers must take into account the dimensions and shape of the space where the lighting system will be installed. This information will inform the layout and arrangement of the tubes and ensure optimal light distribution and coverage.

Lighting Effects

The desired lighting effects should be considered during the design process, as they will influence the choice of LED chips, tube layout, and DMX controller. A well-designed system should allow for smooth transitions, color mixing, and customizable patterns.

Integration with Other Systems

It’s essential to consider how the 360-degree DMX RGB LED tube lighting system will integrate with other systems, such as audio, video, or automation systems. Seamless integration ensures a cohesive user experience and ease of control.

Durability and Maintenance

Designers should prioritize durability and ease of maintenance when creating a lighting system. High-quality components, protective coatings, and accessible designs will ensure the system’s longevity and minimal maintenance needs.

DMX LED Tubes for Different Applications

Stage and Performance Lighting

360-degree DMX RGB LED tube lighting is ideal for stage and performance applications, providing dynamic, eye-catching visuals that enhance the overall production. Designers can create custom layouts and effects that complement the performance and engage the audience.

Architectural Lighting

In architectural applications, these lighting systems can be used to highlight building features or create stunning visual displays on facades. Designers must consider the building’s structure and aesthetics when creating a lighting design that enhances its appearance and complements its surroundings.

Commercial and Retail Spaces

For commercial and retail spaces, 360-degree DMX RGB LED tube lighting can create a captivating ambiance that draws customers in and enhances their experience. Designers must balance visual appeal with functionality, ensuring the lighting system provides sufficient illumination for the space while creating the desired atmosphere.


360-degree DMX RGB LED tube lighting design offers a versatile and innovative solution for creating immersive and captivating visual experiences. By understanding the essential design elements, considering various factors in the design process, and tailoring the system to different applications, designers can transform spaces and create unforgettable lighting displays.


  1. What is the difference between DMX and RGB LED?
    DMX is a communication protocol used to control lighting equipment, while RGB LED refers to the technology that allows for color mixing in LED lights.

  2. Can 360-degree DMX RGB LED tube lighting be used outdoors?
    Yes, with appropriate weatherproofing and protective measures, these lighting systems can be used outdoors for various applications.

  3. How energy-efficient is 360-degree DMX RGB LED tube lighting?
    LED technology is known for its energy efficiency, and the use of high-quality LED chips in these systems further enhances their efficiency.

  4. How long do 360-degree DMX RGB LED tube lights last?
    With proper care and maintenance, these lighting systems can last for many years, often exceeding 50,000 hours of use.

  5. Is it possible to synchronize 360-degree DMX RGB LED tube lighting with music or other media?
    Yes, with the right DMX controller and software, these lighting systems can be synchronized with music, video, or other media to create a cohesive and engaging experience.