Close this search box.

10mm Acrylic Magic Light

New product & High-brightness & Easy install & Waterproof

Acrylic Magic Light 500*300 / 10 mm

Acrylic pixel Panel light white
Acrylic pixel Panel light green
Acrylic Magic Light
Acrylic pixel Panel light RGB

Acrylic Pixel Panel Light Lighting Effect Display

LED Guide Plate Effect

LED Guide Plate Application

Product Parameters

Customization Available

(1) Control Method: TTL

ModelSize (mm)Control MethodIP RatingPower (Watt)LED ColorThicknessVoltage (V)

(2) Control Method: DMX

ModelSize (mm)Control MethodIP RatingPower (Watt)LED ColorThicknessVoltage (V)

Product Description


(1) Acrylic Animated Pixel Panel light or Acrylic magic light is our latest new product.

(2) Acrylic Animated Pixel Panel use high-quality PCB circuit boards, high-brightness super-quality LEDs, it is a kind of indoor landscape decorative lights, which mainly used in bars, commercial squares and other occasions.

(3) Acrylic Magic Light is easy to install, which can be made into waterproof and non-waterproof. And the light can be exported to make the light softer, more delicate and less dazzling. It can be connected arbitrarily according to the environment, and the flickering effect can be set at will according to your requirements. The main colors are addressable RGB and RGBW.

(4) Acrylic magic light supports DMX512 and TTL control way.

(5) The shell of the acrylic magic light is composed of imported light guide plate materials and aluminum alloy. The advantages of pixel panel materials: high-quality heat resistance, good transparency and high impact resistance and light guide effect, and has high light transmittance, uniform light emission etc.

Product Dimensions

6mm acrylic edge lit RGB light Product Dimensions

Installation Notes

(1) Please read the manual in detail before installation.
(2) Before installation, make sure that the working voltage of the LED meteor tube light matches the output voltage of the switching power supply you purchased.
(3) When installing, pay attention to the wiring label of the lamp. The red wire is connected to “positive (+)”, the black wire is connected to “negative (-)”, and other colors are detailed on the wiring label of the lamp. The wiring must be powered off during installation.
(4) It is strictly forbidden to cut off the male and female head wires with electricity, so as not to burn out the lamps in the short-circuit.
(5) LED meteor tube light with control must comply with the male in and female out, and the direction of the signal must be connected in series when connecting the lamps.
(6) This lamp is forbidden to be disassembled without permission, if it is disassembled without permission, our company will not bear the warranty.

Simple troubleshooting

(1) When the lamp does not turn on when it is powered on: check whether the switching power supply has a working output voltage, or whether the working voltage of the switching power supply is normal.
(2) After the switch power supply works normally, the lamp still does not light up: check whether the signal line
of the lamp is connected incorrectly or whether the connection is normal, and check whether the controller works normally and whether it has been powered on.
(3) The above work is normal, but the lamp still does not light up: check whether the SD card of the controller has been inserted, and whether there is a program in the SD card.
(4) The lamp jumps or flickers: Check whether the negative pole of the lamp is connected in parallel with the negative pole of the switching power supply including the GND of the controller.
(5) If the above inspection is completed, it is still out of control, please contact our sales staff to deal with it.

Table of Contents

Acrylic Magic Light: 10 Tips You Need to Know

Introduction to Acrylic Magic Light Guide Plates

A Light Guide Plate (LGP) is a thin, transparent acrylic sheet that is specially designed to distribute light evenly across its surface. LGPs are typically used in LED lighting systems to create a uniform, bright light without any hotspots or dark areas. This innovative technology has gained popularity in recent years due to its energy efficiency, durability, and versatility in various applications.

The working principle of the LED acrylic magic light guide

The led light diffuser panels on led light guide displays are made of optical-grade acrylic sheets. These sheets use highly reflective, non-absorbent materials to direct light to specific points on their bottom surface.

The optical-grade acrylic absorbs the light emitted from the light source, keeping it on the surface of the sheet. When the light hits the respective LED light guide points, the reflected light scatters in different directions. The light then escapes from the front of the light guide plate. The light guide plate can be evenly lit by the different-sized light guiding points.

The working principle of the LED light guide

The purpose of the reflective paper is to bounce the light escaping from the bottom of the sheet back into the LED light guide panel. This helps maximize the usage of the light.

In simple terms, the acrylic sheets take in the light from the LEDs and direct it to specific points using highly reflective materials. The light then scatters and escapes the sheet, lighting it evenly. Any light escaping downwards is reflected back up into the sheet to minimize waste. The end result is an evenly and efficiently lit led window display.

Manufacturing Process

The manufacturing process of LGPs involves several crucial steps to ensure optimal light distribution and performance. It starts with selecting high-quality acrylic sheets which are then treated with special coatings to achieve optimal light transmission. The next step involves laser etching or silk-screen printing microdots or patterns on one side of the acrylic sheet. These microdots or patterns help in redirecting the light from the LED sources, allowing it to spread evenly across the entire surface of the plate.

Applications of Acrylic Magic Light Guide Plates

Light Guide Plates, also called acrylic magic lights, are widely used in various industries and settings due to their versatility and efficiency. Some common applications include:

  1. Backlighting for LCD screens – LGPs are used in televisions, computer monitors, and other display devices to provide even backlighting, improving image quality and reducing power consumption.
  2. Illuminated signage – LGPs can be used to create bright, attention-grabbing signs for advertising, wayfinding, or safety purposes.
  3. Decorative lighting – LGPs can be incorporated into interior design elements such as wall panels, shelves, and furniture to create unique, eye-catching lighting effects.
  4. KTV (Karaoke) lighting – LGPs can be used to enhance the ambiance of entertainment venues with custom lighting solutions.

Advantages of Using Acrylic Magic Light Guide Plates

There are several benefits of using LGPs in various applications:

  1. Energy efficiency – LGPs allow for brighter and more uniform light distribution using fewer LED sources, resulting in lower energy consumption.
  2. Durability – The acrylic material used in LGPs is resistant to impact, corrosion, and UV light, ensuring a long lifespan and low maintenance costs.
  3. Slim design – LGPs are thin and lightweight, making them easy to install and integrate into various settings or design elements.
  4. Customization – LGPs can be tailored to specific requirements, such as size, shape, and light distribution patterns, for a truly unique lighting solution.

How to Choose the Right Acrylic Magic Light Guide Plate

To select the appropriate LGP for your needs, consider the following factors:

  1. Size and shape – Choose an LGP that fits the dimensions of your application, whether it’s a small signage display or a large backlighting panel.
  2. Light distribution pattern – Select an LGP with a suitable pattern to achieve the desired lighting effect and uniformity.
  3. LED compatibility – Ensure that the LGP is compatible with your chosen LED light sources to optimize performance and efficiency.
  4. Quality and durability – Look for LGPs made from high-quality materials to ensure a long-lasting and reliable lighting solution.


Light Guide Plates are an innovative and versatile lighting solution that offers numerous benefits, including energy efficiency, durability, and customization. They can be used in various applications, such as backlighting, signage, decorative lighting, and entertainment venue illumination. By understanding the manufacturing process, applications, and advantages of LGPs, you can make an informed decision when selecting the right light guide plate for your specific needs.


  1. What material is used to make acrylic magic Light Guide Plates?

  2. LGPs are typically made from acrylic, a durable and lightweight material that offers excellent light transmission properties.

  3. Is Acrylic Magic Light energy-efficient?
    Yes, acrylic magic light enables even light distribution with fewer LED sources, resulting in lower energy consumption.

  4. Can I customize the size and shape of a Light Guide Plate?
    Yes, LGPs can be tailored to specific requirements, such as size, shape, and light distribution patterns.

  5. Are acrylic magic Light Guide Plates suitable for outdoor use?

  6. LGPs made from high-quality materials are resistant to impact, corrosion, and UVlight, making them suitable for both indoor and outdoor applications.

  7. What are some common applications of Light Guide Plates?
    LGPs are widely used in backlighting for LCD screens, illuminated signage, decorative lighting, and KTV (Karaoke) lighting.